

When installing glue-down vinyl flooring, vinyl floor adhesive is used to secure the planks to the subfloor. The quality of this adhesive significantly impacts the floor's adhesion and the overall durability of the installation. However, not everyone fully understands what vinyl floor adhesive is or the different types available on the market.
This article will help you understand the common types of adhesives for vinyl flooring, their pros and cons, and how to use and store them correctly for optimal results, minimizing the risk of the floor peeling over time.
Vinyl floor adhesive is a specialized glue used in the installation of glue-down vinyl flooring, vinyl tiles, or PVC tiles. During installation, technicians apply a thin layer of vinyl floor adhesive to the existing subfloor (concrete, cement, tile, old vinyl, or wood flooring), wait for it to reach the standard dry time of about 15-30 minutes, and then install the flooring.
This type of PVC floor adhesive offers high adhesion, preventing the floor from peeling or shifting during use. Additionally, the adhesive is moisture-resistant and heat-resistant, which helps prevent the flooring from warping or shrinking due to weather changes.
Compared to self-adhesive vinyl flooring (which has pre-applied adhesive), flooring that uses separate adhesive is generally more durable due to the strong bond, extending the lifespan of the installation and reducing wear over time.

Installing wood-look vinyl flooring with vinyl floor adhesive
Liquid adhesives come pre-mixed in standard ratios and are packaged in common weights such as 2.5 kg, 5 kg, or 10 kg per carton.
How to use: Pour the appropriate amount of adhesive directly onto the subfloor and spread it evenly with a notched trowel to create a thin layer. Wait for the adhesive to become tacky, approximately 15-30 minutes (depending on subfloor conditions), then install the vinyl flooring.
Advantages:
Easy to use, allowing for control over the amount of adhesive applied.
Dries quickly and creates a strong bond between the vinyl flooring and the subfloor.
Applications:
This type of adhesive is most commonly used for installing PVC vinyl flooring due to its high adhesion, health safety, and environmental friendliness.

Liquid vinyl floor adhesive
Spray adhesive is very convenient for installing vinyl sheets or wallpaper on large and hard-to-reach surfaces, such as ceilings, windows, or curved walls.
How to use: Shake the can well, hold it about 15-20cm away, and spray a thin, even layer onto the surface to be adhered (or both surfaces). Wait a few minutes for the adhesive to become tacky, then apply the material and press firmly to increase adhesion.
Advantages:
Provides even and fast coverage, saving time and effort, especially effective for large-area projects.
Suitable for both craft and DIY projects, allowing for easy and precise application on paper, plastic, fabric, or other lightweight materials.
Powder adhesive is suitable for large-scale projects such as warehouses, supermarkets, schools, and public areas with high foot traffic. It creates a durable, load-bearing, and long-lasting bond.
How to use: Mix the powder adhesive with water according to the manufacturer's instructions, stirring until it reaches the desired consistency. Use a notched trowel to spread a thin layer of adhesive on the subfloor, wait for it to become tacky, then install the vinyl flooring and roll it down firmly.
Using vinyl floor adhesive offers numerous practical benefits, contributing to a more durable and aesthetically pleasing floor, while minimizing risks of peeling, shifting, or warping during use.
High Adhesion: Vinyl floor adhesives contain polymers or synthetic resins that create a strong bond on various surfaces, forming a very secure connection between the vinyl flooring and the subfloor.
Extends Floor Lifespan and Protection: A durable adhesive layer helps the floor withstand the effects of moisture, temperature, and mechanical stress, thereby extending the installation's lifespan.
Time-Saving: Adhesives are designed for quick application, easily spread or sprayed evenly over the surface, reducing labor and installation time compared to using drills or screws.
Enhances Aesthetics: The adhesive creates a uniform bond, resulting in a smooth, flat floor without gaps or misaligned tiles, maintaining a durable and clean appearance.
Safe and Environmentally Friendly: Most modern adhesives are manufactured with safe ingredients, have no strong odors, and are not harmful to user health.
Therefore, even when using pre-adhesive vinyl flooring, applying an additional layer of vinyl floor adhesive is recommended by experts to enhance the floor's durability.
Here are 6 detailed steps for using vinyl floor adhesive according to standard technical procedures:
1. Prepare the Subfloor
Clean the floor of dust, grease, and debris.
Ensure the subfloor is dry, level, and free from cracks.
2. Prepare the Adhesive
Shake the adhesive container well before use.
Pour an adequate amount of adhesive onto the subfloor.
3. Spread the Adhesive: Use a notched trowel (or specialized tool) to spread the adhesive, ensuring a thin and even layer.
4. Wait for Adhesive to Dry: Wait approximately 15-30 minutes until the adhesive turns opaque white.
5. Install the Vinyl Flooring
Place the vinyl flooring planks in the correct position sequentially.
Press down gently and smooth firmly to ensure the adhesive bonds evenly to the surface.
6. Initial Finishing & Maintenance
Avoid moving heavy furniture for the first 24-48 hours to allow the adhesive to cure completely.
Check the floor edges and reinforce with additional adhesive if necessary.
👉 Following the above process correctly will ensure the vinyl floor adhesive performs optimally and guarantees the most durable and aesthetically pleasing installation.
>> See more Guide to Installing Glue-Down Vinyl Flooring According to Technical Standards

Installing glue-down vinyl flooring
To maintain the adhesive's optimal quality, store it correctly following these guidelines:
Store vinyl floor adhesive in a dry, cool place, away from direct sunlight. The best storage temperature is between 10°C and 30°C. Avoid exposing the adhesive to flammable materials, heat sources, or open flames.
After use, seal the container lid tightly to prevent air from entering and drying out the adhesive.
Do not allow the adhesive to freeze. If it freezes, warm it to room temperature before reuse. Note that the adhesive's quality may degrade if frozen multiple times.
Check the expiration date on the product packaging and use the adhesive only within the allowed period. Expired adhesive may have poor bonding strength.
Store the adhesive in a safe place, out of reach of children and pets. If the adhesive comes into contact with skin or eyes, rinse immediately with water and seek medical attention if necessary.
While there are many types of floor adhesives on the market, in terms of quality and reliability, imported Korean brands such as W250G, Y-6000, or KJ-8800 are highly regarded.
KJ-8800 vinyl floor adhesive is manufactured in Vietnam using advanced technology from South Korea. It is available in 1kg bags and 15kg cartons, convenient for various project sizes.
This adhesive has an ideal viscosity, spreading easily on the floor surface without clumping or running. With its affordable price, KJ-8800 is suitable for both residential and commercial projects. However, in humid or cold weather conditions, the drying time may be longer than usual.

Best Vinyl Floor Adhesives Available Today
Y-6000 vinyl floor adhesive is imported from a reputable brand in South Korea – Young Jin Co, Ltd – South Korea. It is known for its strong adhesion, fast drying time, odorless nature, and user-friendliness. Y-6000 can be widely applied to most types of flooring surfaces available today, providing optimal installation results.
W-250G vinyl floor adhesive is from Hwaseong Co, Ltd, South Korea. It is a water-based (Acrylic Water-Base) adhesive with a characteristic milky white color, directly imported by Thien Ha Floor into Vietnam. With its proprietary technology, W-250G offers excellent resistance to mold and moisture, protecting the floor surface from external environmental impacts.
Thien Ha Floor is a leading supplier of genuine anti-static vinyl floor adhesives at competitive prices in Vietnam. We are committed to providing only high-quality adhesives that have been tested and used by the experienced installation team at Thien Ha Floor in hundreds of vinyl flooring projects nationwide.
Vinyl floor adhesive prices at Thien Ha Floor range from 75,000 – 110,000 VND/kg.
Vinyl and Floor Adhesive Price List
Packaging | Retail Price | |
10kg Carton | 800,000 VND/carton | |
1kg Bag or 15kg Carton | 75,000 VND/kg | |
10kg Carton | Contact for best price | |
12kg Carton | 1,320,000 VND |
Contact Hotline: 0909192557 for free consultation and the best price quote.
Typically, 1kg of vinyl floor adhesive can cover approximately 4-6 m² of vinyl flooring (for a standard subfloor: level, smooth, dry). The actual coverage will depend on the type of adhesive, the thickness of the adhesive layer, and the subfloor surface. For precise figures, refer to the specific instructions from the manufacturer, adhesive supplier, or an experienced installer.
Vinyl floor adhesive can be used on most common subfloors such as concrete, cement, tile, wood, or existing vinyl flooring, provided the subfloor is level, clean, and dry before applying the adhesive.
Most vinyl floor adhesives have a slight odor during application. However, this odor gradually dissipates after the adhesive dries and is no longer noticeable during use. Therefore, if working in a confined space, ensure good ventilation or wear a protective mask.





![PVC Wall and Ceiling Panel Price List [2026]](https://cdn.thienhafloor.vn/2025/08/tam-nhua-op-tuong-pvc-5.jpg)






![PVC Wall and Ceiling Panel Price List [2026]](https://cdn.thienhafloor.vn/2025/08/tam-nhua-op-tuong-pvc-5.jpg)
